Description
A highly impact-resistant extruded thermoplastic sheeting material. Its unique multi-fluted design gives increased strength, impact, puncture and damage resistance.
PROTECTOBOARD™
Tough, light-weight, protection sheet
- Description
- Product Uses
- Features
- Substrate Preparation
- Application
- Typical Properties
- Coverage
- Packaging
- Health and Safety
- Limitations
- Warranties
- Downloads
- Reviews (0)
Product Uses
PROTECTOBOARD™ is used to protect all GCP liquids and sheet membranes, as well GCP waterproof membranes. It protects basement or lift-pit walls, retaining walls, planter boxes and landscaped podium decks. PROTECTOBOARD™ is also used to protect carpet, marble, vanity tops, benches and lift walls and floors, during construction.
Features
- Complies with Green Star requirements
- Non-toxic to plant root systems
- Exceptional resistance to impact and site abuse
- Economical in material and installed labour costs
- Light-weight, easy to transport and handle
- Does not apply shear load to vertical membrane
- Simple adhesive or tape fixing
- Does not absorb water or rot like EPS foam sheets
- Protects membrane by absorbing impact
- Conforms readily to irregular or curved surfaces
- Suited to horizontal and vertical use
- Heavy-duty grades of PROTECTOBOARD™ are available on request for special application or service requirements
Substrate Preparation
Inspect waterproofing for damage and repair as required.
Application
Install PROTECTOBOARD™ sheets to clean dry surface.
- Hold in place with adhesive compound or tape.
- Apply adhesive materials at 300-500mm centres.
- Butt joint sheets to give a neat finish. Joints may also be sealed with PVC waterproof tape.
- Use PROTECTOFLASH™ metal retention flashing as top edge detail, fixed at approximately 300mm centres.
- Do not damage waterproof membrane with fixings.
Typical Properties
| Property | Typical Value |
|---|---|
| Colour | Black |
| Structure | Polypropylene Flute Sheet |
| Chemical Resistance | Excellent |
| Elongation (ASTM D638) | >100% |
| Hardness (ASTM D648) | > 60 Shore D |
| Fungus Resistance | Excellent |
| Crush Strength | > 10 MT/m2 |
| Thickness | 2.5 – 3.0 mm (nom) |
Landscaped podiums and planter boxes may use RAPID-DRAIN™ geo-composite drainage cell on floors (covering and protecting floor waste).
NOTE
- As PROTECTOBOARD™ is very lightweight, it should be securely restrained to prevent displacement by wind.
- Not suitable for permanent exposure.
Coverage
Each sheet of PROTECTOBOARD™ will cover approximately 2m2.
Packaging
PROTECTOBOARD™ sheet size is 1.83m x 1.22m or rolls of 1.22m x 50m. Other grades and sizes may be available by special request.
Health and Safety
In case of spills and accidents, refer to the MSDS of the products or when in doubt contact your local GCP representative. Always wear protective clothing, gloves and protective goggles when handling chemical products. For full information, consult the relevant MSDS.
Limitations
Information contained in this document does not cover all possible application scenarios or imply product suitability for an application. Please contact your local GCP representative or the GCP Technical Department for further information.
Warranties
GCP and contractors recognised by GCP as experienced in the application of GCP products will provide warranties for individual projects. Warranty periods offered are dependent on project details and complexity. Requests for very long warranty periods may necessitate increased membrane thicknesses to ensure longevity. Contact your local GCP representative for further details.
Release Date: 23/06/25. The information contained in this product data sheet supersedes all previous versions.
Reviews
There are no reviews yet.